|
|
|||
|
|
|||
|
|
|||
.jpg)
|
Specifications
-Impedance matching range: 6 to 1600 ohms -SWR matching range: Up to 8:1 for < 50 ohms and up to 32:1 for > 50 ohms -Minimum power for tuning: 2 watts -Maximum power while tuning: 100 watts with foldback, 20 watts without foldback -RF power limit: 200 watts SSB/CW -Frequency range: 1.8 to 30 MHz continuous coverage -Frequency counter accuracy: ±1 kHz across HF bands -A/D conversion resolution: 8-bit -Capacitance range: 0 to 3961 pF nominal (256 values) -Inductance range: 0 to 24.86 μH nominal (256 values) -Relay rating: 10 amp 1000 volts -Relay electrical life: 100,000 operations -Relay mechanical life: 10 million operations -Memory endurance: 1 million erase/write cycles -Memory data retention: > 200 years -Power supply requirements: 12-15 volts DC -Current consumption: 750 mA or less -Dimensions: 11inL X 7inW X 2.64inH 279.4mmL X 177.8mmW X 67.05mmH |
||
|
Features
-Automatically matches antennas from 6 to 1600 ohms impedance (SWR up to 32:1) -Handles 200 Watts SSB/CW -Tunes in leass than 15 seconds, usually less than 5 seconds -Over 20,000 non-volatile memories for tuner settings -Eight memory banks with over 2500 memories per bank -Highly efficient switching L-network matching circuit -1.8 to 30 MHz continuous frequency coverage -Audio SWR meter -Built-in frequency counter for remembering frequency-specific matching values -Built-in radio interface circuitry for compatible radios -Built-in bias tee -Connectors: Type “N” |
|
||
|
|
|||
proprietary to Hascall-Denke. Specifications are subject to change without prior notice. | |||
1.jpg) |
Tel: 941.723.2833 •
www.hascall-denke.com Fax: 941.723.1628 05252011_0849 | ||
| ||
|
| ||
