Antenna Mounts & Accesories
At Hascall-Denke, we put as much attention to the quality of our mounts and other accessories as we do to our antennas that go on them. We have mounts that will support almost every antenna that we produce. We can also design one to meet your specifications. Custom manufacturing is our specialty.
UM007T, shown on the right, is one of our pole mounting systems and can adapt to a range of different pole diameters. This tactical version uses quick, easy to grip knobs for fast setup and removal. It will support pipe diameters from 1″ – 1.5″.
For more information on finding mounts or accessories for your application,or to have one designed to meet your specifications,
please call or e-mail Hascall-Denke today.
UM002 Mounting Bracket (1Y00129)
The UM002 Mounting Bracket is a versatile vehicular mount that allows tilting the antenna 90°. The bolt hole spacing pattern is 6 holes equally spaced on a 3-1/16” BHC. The mount is constructed with stainless steel for corrosion resistance.
MM002 GPS Magnetic mount (1Y01775)
The MM002 GPS Magnetic Mount is a rugged elevated mount with a 3” (76.2 mm) magnet that is coated for scratch resistance.
MM003 Magnetic mount (1Y00470)
The MM003 Magnetic Mount is a rugged vehicular mount that consists of a 4.5” (113.4 mm) heavy duty magnet and multiple options for the antenna connector, cable connector, and cable length
SLH002 Spring Hanger (1Y00890)
The SLH002 Spring Hanger is designed to absorb vibration to or from suspended loads. The double nut construction of the light fixture suspension bolt allows easy adjustment of up to 1/2” (12.7 mm) when installed on uneven surfaces.
UM003 Mounting Bracket (1Y02750)
The UM003 Mounting Bracket is a pole mounted bracket commonly used for attaching our Discone or Bicone antennas. It will mount up to a 2.5” (63.5 mm) diameter mast and antennas up to 1.25” (32 mm) in diameter. It is constructed with stainless steel.
UM004AB Mounting Bracket (1Y11500)
The UM004AB Mounting Bracket is designed with high strength and reliability in mind. This tough and rugged design is made from 6 gauge stainless steel. Built for the toughest and most extreme conditions. This Mount is designed to be used for both horizontal and vertical mounting applications. Each mount includes two U-Bolts with hardware shown. The UM004AB fits masts sizes up to 2” (50.8)
UM007F Fixed Mount (1Y09950)
The UM007F Fixed Mount is one of our pole mounting systems that can adapt to a range of different pole diameters from 1” (24.5 mm) to 1.5” (38.1 mm). The construction of this mount consists of heavy duty aluminum and stainless steel hardware.
UM007T Tactical Mount (1Y09900)
The UM007T Tactical Mount is one of our pole mounting systems that can adapt to a range of different pole diameters from 1” (24.5 mm) to 1.5” (38.1 mm). This tactical version uses quick, easy to grip knobs for fast setup and removal from the mast and permanently mounts to the antenna using bolts.
UM008 Mast Mount (1Y11100)
The UM008 Mast Mount is designed to mount to pole diameters up to 3” (76.2 mm) and antenna diameters from 1” (24.5 mm) to 1.5” (38.1 mm). UM008-A fits poles from: 2 – 3” (50.8 – 76.2mm) UM008-B fits pole sizes from: 1 3/4 – 2 1/2” (44.5 – 63.5mm) The construction of this mount consists of heavy duty aluminum and stainless steel hardware.
UM009 NATO Vertical/Horizontal Magnetic Mount (1Y11650)
The UM009 NATO Vertical/Horizontal Magnetic Mount has a heavy duty aluminum construction with corrosion resistant stainless steel hardware and four strong 5” (127 mm) diameter magnets.
UM011 NATO to 2” Mast Mount (1Y11250)
The UM011 NATO to 2” Mast Mount is an adapter that allows for NATO base antennas to be mounted on the upper ring using the standard four .5” (12.7 mm) holes, equally spaced on a 4.5” (114.3 mm) dia. BHC. The lower portion slides into the top of a mast and twist locks into position. The lower portion also contains a hole for cable routing.
UM016 MAST ANTENNA ADAPTER (1Y26550)
The UM016 Mast Antenna Adapter is designed to mount an antenna to the top of Denke’s 20’ Portable Mast. The UM016 can be configured for antennas with PSC-5, Type “N”, TNC. BNC, and UHF connectors. See chart below for corresponding part numbers. The UM016 is mounted with standard 3/8” stainless steel hardware. The construction of the UM016 is heavy duty aluminum which is anodized and painted. A short RG-58 pigtail extends from the mount and is terminated with a BNC.
HDM006 Roof Mount (1Y15900)
The HDM006 Roof Mount is a flush mounted base that only requires a 5/8” (16mm) drill hole for easy mounting. The mount comes with a external tooth lock washer and hex nut and 17’ (5.2m) of unterminated RG-58 coax. A variety of connectors can be chosen for the antenna connection, options listed below.
HDM008 NMO THRU Mount (1Y05750)
The HDM008 NMO Thru Mount is designed to be mounted on vehicle surfaces with only a single 7/8” hole and has an O-Ring for sealing against the surface. The internal hole has a hex shape to be held in place with a 1/2” Allen wrench while tightening the external part with a 15/16” wrench.
- O-Ring for Surface Sealing
- 1/2” (12.7mm) Cable Pass Thru
HDM009 Fixed Mount (1Y26300)
The HDM009 Fixed Mount is one of our pole mounting systems that can adapt to a range of different pole diameters from 2” (50.8 mm) to 2.5” (63.5 mm).
6″ NATO Riser (1Y11800)
The 6” NATO Riser features the NATO Standard 8 .5” (12.77 mm) holes equally spaced on a 4.5” (114.3 mm) Dia. BHC. It is constructed of heavy duty aluminum. Other lengths available upon request.
20’ PORTABLE MAST
The HDTM-20 20’ Portable Mast is a lightweight, rapid deployable mast for tactical environments. It can easily be carried over the should by one person and erected in under 10 minutes. The mast extends up to a height of 20 ft. (6.1 m) and down to a nested height of 4 ft. (1.2 m).
Series II Communications Platform
Frequency Range: 30-512 MHz
Gain: -6.0 ~ 1.0 dBi @ 30-90 MHz
-2.0 ~ 0.0 dBi @ 100-512 MHz
VSWR: < 3.0:1 Typical 3.5:1 Maximum
Ruggedized Automatic Antenna Tuner
Automatically matches antennas from 6 to 1600 ohms impedance (SWR up to 32:1)
Handles 200 Watts SSB/CW
Tunes in leass than 15 seconds, usually less than 5 seconds