20-120 MYHZ VHF Balun (1Y39250)

The VHF Balun is part of our Series II Com-munications Platform, but can be used sepa-rately to isolate a 20-88 MHz (low band) an-tenna from a 113-512 MHz (high band) an-tenna. It can also be used to feed two an-tenna outputs into a single radio input.
The VHF Balun adds very little loss (less than 1/4 dB at most frequencies) while providing excellent isolation (as much as 60 dB)

ELECTRICAL:
Frequency Range: 20-120 MHz
VSWR: 2.5:1 Nominal
Input Impedance: 50 Ω Nominal
Power: 300 Watts
Input Connector: N Female
Output Connector: N Female
MECHANICAL:
Overall Dimensions: 7 x 2 in. (178 x 51 mm)
Color: Black/Green/Tan/Grey
**Note: This Balvun is broadband and requires no tuning or
adjustment of any kind by the operator.